Specification

=================================================================
SECTION VII - SPILL OR LEAK PROCEDURES
-------------------------------------------------------------------------------------------------------------------------------------------
-STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Ventilate area. Absorb spill with suitable absorbent material and place in a closed container. For large
spills, dike area and pump into closed containers. Prevent this material from entering waterways.
-WASTE DISPOSAL METHOD:
At this time, this material or its containers would not be considered hazardous wastes as defined under
the federal RCRA regulations (40 CFR 261) if discarded. Care should be taken to ensure that the
material or its containers are disposed of in An approved facility in accordance with current federal, state,
and local regulations.
=================================================================
SECTION VIII - SPECIAL PROTECTION INFORMATION
-------------------------------------------------------------------------------------------------------------------------------------------
-RESPIRATORY PROTECTION:
Respiratory protection may be required if material is used in poorly ventilated areas or if material is
sprayed or heated.
-VENTILATION:
General ventilation is recommended.
Local ventilation may be required if material is sprayed or heated.
-PROTECTIVE GLOVES:
Chemical-resistant gloves should be worn to prevent prolonged or repeated skin contact.
-EYE PROTECTION:
Chemical goggles should be worn to prevent eye contact with spills, splashes or vapors.
-OTHER PROTECTIVE EQUIPMENT:
Eye wash fountain and safety shower should be available.
=================================================================
SECTION IX - SPECIAL PRECAUTIONS
-------------------------------------------------------------------------------------------------------------------------------------------
-PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
Avoid prolonged or repeated inhalation of heated vapors or spray mists. Avoid prolonged or repeated
skin contact.
Prop 65 Ingredients: Crystalline Silica, Formaldehyde. NJ Right-to-Know: (Top 5 Ingredients): Base Acrylic Emulsion Blend (mixture), Water (7732-18-5).
Pennsylvania Right-to-Know (Non-Haz @ >3%): Water (7732-18-5). Ingredients Known to State of California to cause cancer &/or developmental toxicity &/or
reproductive toxicity: Formaldehyde (50-00-0). HMIS Ratings: Health: 1, Flammability: 0, Reactivity: 0, Personal Protection: X. WARNING: This product contains
chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
=================================================================