User Manual

24
27. If you plan to keep your stabs attached to the fuselage during transport then a 36" 20 Awg servo
extension is long enough. If you plan to remove the stabs you will need to use a 48" extension. Secure the
extension to the elevator servo lead with an EF Servo Safety Clip or heat shrink tubing.
28. The 85" Edge uses a new quick mount system that allows the stab/elevator assembly to be installed or
removed quickly with no tools required. The thumb screws ride on a sliding carriage system which when
moved to the forward position allow the stabs to be slid into place. The bolts are then pushed rearward
into position and tightened. The front thumbscrew has an O ring that fits into a recess in the forward
mounting tab. This prevents the carriage from sliding forward when the thumbscrew is tightened. To
remove simply loosen the rear thumb screw a couple turns to clear the tab. The forward thumbscrew
will require a few more turns so that the O ring clears the forward tab.