User Manual

33. Install your choice of prop (if using the DA-50 we highly recommend the Falcon 23x8 Carbon Fiber

prop) and Extreme Flight 4" carbon fiber spinner. We have spinners available that are painted to match

these color schemes.

34. Install your switches (there are suggested switch mounting locations laser scribed in the fuselage

sides visible from the interior of the fuselage), batteries and receiver. In our prototype flown with the

GP-61 we mounted our batteries on either side of the fuel tank for correct balance. We used Pulse

receiver batteries, 2S 2550mah for ignition and 3600mah for servos/receiver.

35. The wings are attached to the fuselage using a brand new quick mount lever system. There is a steel

stud mounted in the root of the wing. The wing is slid onto the carbon fiber wing tube and against the

fuselage side and the lever inside the fuselage is pushed into place, capturing the stud. This is a very

secure system that allows fast assembly and disassembly of your model at the flying field.