User Manual

12. Secure the carbon pushrod to the EZ connector with the provided set
screw. Take care not to over tighten the set screw and crush the carbon rod.
Once you feel the set screw engage the carbon pushrod another 3/4 to 1 turn
will supply adequate pressure to retain the pushrod. Make sure that the servo
arm is perpendicular to the servo case when the aileron is in the neutral
position.
12

Modellbau Lindinger GmbH
Modellbau Lindinger GmbH Alte-Post-Str. 14 A-4591 Molln e-Mail: [e-mail] www.lindinger.at