User Manual

24. The rudder servo linkage assembles and is installed just like the aileron
linkage. The previous picture illustrates this installation. For maximum
elevator travel we have included a G10 control horn which is bolted to the
stock control horn provided with the servo. We have found it easiest to tack
glue the G10 arm to the nylon arm and then using the holes in the nylon arm
as a guide, drill through the composite arm. Secure the arm with the
provided screws and bolts. The remaining portion of the linkage installation
is the same as the other control surfaces
.
21

Modellbau Lindinger GmbH
Modellbau Lindinger GmbH Alte-Post-Str. 14 A-4591 Molln e-Mail: [e-mail] www.lindinger.at