User Manual

25. We have included 2 plywood spacers in order to accommodate several
motor lengths. If using the Torque 2814T/820 no spacer is required. If using
the Torque 2818T/900 glue both of the supplied spacers together and place
them between the motor mounting plate and the radial mount supplied with
the motor. Mount the motor using the supplied 3mm black socket head cap
bolts which are threaded into the blind nuts which are pre-installed in the
motor mount plate. Be sure to put a drop of blue Loctite onto each bolt to
prevent them from backing out
.
22

Modellbau Lindinger GmbH
Modellbau Lindinger GmbH Alte-Post-Str. 14 A-4591 Molln e-Mail: [e-mail] www.lindinger.at