User Manual

This is a picture of the Torque 2818T/900 installed with the 2 ply spacers in
place. Also notice the laser cut baffles. A set of these is included which can be
attached to the motor box to improve cooling by directing air over the motor.
We have not found this necessary but we have yet to fly the aircraft on a hot
summer day. Monitor your motor temperatures and if necessary use the
baffles. You will find it necessary to lightly sand the top front of edge of the
baffle to allow for proper cowl installation
.
23

Modellbau Lindinger GmbH
Modellbau Lindinger GmbH Alte-Post-Str. 14 A-4591 Molln e-Mail: [e-mail] www.lindinger.at