User Manual

27. There is a laser cut opening in the bottom of the fuselage under the rear of
the canopy. Use a sharp hobby knife to remove the covering from this
location to allow cooling air to exit the fuselage.
28. Use nylon cable ties or Velcro to secure the ESC to the bottom of the
motor box. There is an opening in the cowl just in front of this location to
allow cooling air to enter and be directed over the ESC.
29. Place a strip of Velcro onto the battery tray and onto your battery and use
a Velcro strap around the battery and tray to prevent the battery from being
ejected during high G maneuvers. Mount your receiver on the portion of the
battery tray that extends behind the wing tube with Velcro
.
25

Modellbau Lindinger GmbH
Modellbau Lindinger GmbH Alte-Post-Str. 14 A-4591 Molln e-Mail: [e-mail] www.lindinger.at