BlackDiamond Switches Hardware Installation Guide

BlackDiamond 12800 Series Modules
BlackDiamond 12800 Series Switches Hardware Installation Guide
22
Features of the BlackDiamond 12800 MSMs
Figure 5 shows the MSM-5 module, Figure 6 shows the MSM-5R module, and Figure 7 shows the
MSM-6R module.
Figure 5: MSM-5 Module
Figure 6: .MSM-5R Module
Figure 7: .MSM-6R Module
Each MSM consists of a printed circuit board mounted on a metal panel that acts as the insertion vehicle
in the BlackDiamond 12800 series switch. The module carrier also includes ejector/injector levers and
captive retaining screws at each end of the module front panel.
The MSMs have the following features on the front panel:
● Console port—The DB-9 serial console port is used to connect a terminal, allowing you to perform
local management.
● Management port—The 10/100 Mbps Ethernet management port allows you to connect an Ethernet
cable directly from your laptop to the management port to view and locally manage the switch
EX_150h
Module status
LEDs
ERR
ENV
SYS Reset
MSTR
Compact
flash
Console
port
MGMT port
EX_151h
Module status
LEDs
ERR
ENV
SYS Reset
MSTR
Compact
flash
Console
port
MGMT port
EX_183
Module status
LEDs
ERR
ENV
SYS Reset
MSTR
Compact
flash
Console
port
MGMT port