Reference Guide

Format snmptrap ipaddr snmpversion name snmpversion
Mode Global Configuration
snmptrap ip6addr snmpversion
This command modifies the SNMP version of a trap. The maximum length of name is 16 case-sensitive
alphanumeric characters. The snmpversion options are snmpv1 or snmpv2.
Note
This command does not support a “no” form.
Format snmptrap ip6addr snmpversion name snmpversion
Mode Global Configuration
show snmp
This command displays the current SNMP
configuration.
Format
show snmp
Mode Privileged EXEC
Column Meaning
Community Table: Community-String
The community string for the entry. This is used by SNMPv1 and SNMPv2 protocols to
access the switch.
Community-Access The type of access the community has:
•
Read only
•
Read write
•
su
View Name The view this community has access to.
IP Address Access to this community is limited to this IP address.
Community Group Table: Community-String
The community this mapping configures
Group Name The group this community is assigned to.
IP Address The IP address this community is limited to.
Host Table: Target Address
The address of the host that traps will be sent to.
Type The type of message that will be sent, either traps or informs.
Community The community traps will be sent to.
Version The version of SNMP the trap will be sent as.
UDP Port The UDP port the trap or inform will be sent to.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 104