Reference Guide

show snmp-server
This command displays the current SNMP server user configuration.
Format show snmp-server
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220)#show snmp-server
SNMP Server Port............................... 161
show snmp source-interface
Use this command in Privileged EXEC mode to display the configured global source-interface (Source
IP address) details used for an SNMP client.
Format show snmp source-interface
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220) (Routing)# show snmp source-interface
SNMP trap Client Source Interface.............. (not configured)
show snmp user
This command displays the currently configured SNMPv3 users.
Format
show snmp user [username]
Mode Privileged EXEC
Column Meaning
Name The name of the user.
Group Name The group that defines the SNMPv3 access parameters.
Auth Method The authentication algorithm configured for this user.
Privilege Method The encryption algorithm configured for this user.
Remote Engine ID The engineID for the user defined on the client machine.
show snmp views
This command displays the currently configured views.
Format
show snmp views [viewname]
Mode Privileged EXEC
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 106