Reference Guide

radius server timeout
This command configures the global parameter for the RADIUS client that specifies the timeout value
(in seconds) after which a request must be retransmitted to the RADIUS server if no response is
received. The timeout value is an integer in the range of 1 to 30.
Default 5
Format radius server timeout seconds
Mode Global Config
Parameter Description
retries Maximum number of transmission attempts in the range 1–30.
no radius server timeout
The no version of this command sets the timeout global parameter to the default value.
Format no radius server timeout
Mode Global Config
server-key
Use this command to configure a global shared secret that is used for all dynamic authorization clients
that do not have an individual shared secret key configured.
Default
None
Format server-key [0 | 7] key-string
Mode Dynamic Authorization
Parameter Description
0 An unencrypted key is to be entered
7 An encrypted key is to be entered
key-string
The shared secret string. Maximum length is 128 characters for unencrypted key
and 256 characters for encrypted key. Overrides the global setting for this client
only. Enclose in quotes to use special characters or embedded blanks.
The following shows an example of this command:
(Extreme 220) (Config-radius-da)# server-key encrypted mydevice
no server-key
Use this command to remove the global shared secret key configuration.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 117