Reference Guide

Default None
Format no server-key
Mode Dynamic Authorization
(Extreme 220) (Config-radius-da)#no server-key
show radius servers
Use this command to display the authentication parameters.
Default Not applicable
Format show radius servers {serverIP | name serverName}
Mode User EXEC
(Extreme 220)# show radius servers name Default-RADIUS-Server
RADIUS Server Name............................. CoA-Server-1
Current Server IP Address...................... 1.1.1.1
Number of Retransmits.......................... 3
Timeout Duration............................... 15
Deadtime....................................... 0
Port........................................... 3799
Source IP...................................... 10.27.9.99 <- switch
RADIUS Accounting Mode......................... Disabled
Secret Configured.............................. Yes
Message Authenticator.......................... Enable
Number of CoA Requests Received...................... 203
Number of CoA ACK Responses Sent..................... 111
Number of CoA NAK Responses Sent...................... 37
Number of Coa Requests Ignored........................ 55
Number of CoA Missing/Unsupported Attribute Requests..... 18
Number of CoA Session Context Not Found Requests......... 5
Number of CoA Invalid Attribute Value Requests... 11
Number of Administratively Prohibited Requests.........3
show radius
This command displays the values configured for the global parameters of the RADIUS client.
Format
show radius
Mode Privileged EXEC
Column Meaning
Number of Configured
Authentication Servers
The number of RADIUS Authentication servers that have been configured.
Number of Configured Accounting
Servers
The number of RADIUS Accounting servers that have been configured.
Number of Named Authentication
Server Groups
The number of configured named RADIUS server groups.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 118