Reference Guide

Table Of Contents

content does not scroll o the terminal screen until the user presses a key to continue. --More--

or (q)uit is displayed at the end of each page.

•

When pagination is enabled, press the return key to advance a single line, press q or Q to stop

pagination, or press any other key to advance a whole page. These keys are not conﬁgurable.

Note

Although some 200 Series show commands already support pagination, the implementation

is unique per command and not generic to all commands.

•

Output Filtering

•

“Grep”-like control for modifying the displayed output to only show the user-desired

content.

Filter displayed output to only include lines containing a speciﬁed string match.

Filter displayed output to exclude lines containing a speciﬁed string match.

Filter displayed output to only include lines including and following a speciﬁed

string match.

Filter displayed output to only include a speciﬁed section of the content (for

example, interface 0/1) with a conﬁgurable end-of-section delimiter.

String matching should be case insensitive.

Pagination, when enabled, also applies to ﬁltered output.

Filter displayed output to only include lines containing a speciﬁed string match.

Filter displayed output to exclude lines containing a speciﬁed string match.

Filter displayed output to only include lines including and following a speciﬁed string

match.

Filter displayed output to only include a speciﬁed section of the content (for example,

“interface 0/1”) with a conﬁgurable end-of-section delimiter.

String matching should be case insensitive.

Pagination, when enabled, also applies to ﬁltered output.

The following shows an example of the extensions made to the CLI show commands for the Output

Filtering feature.

(Extreme 220) (Routing) #show running-config ?

<cr> Press enter to execute the command.

| Output filter options.

<scriptname> Script file name for writing active configuration.

all Show all the running configuration on the switch.

interface Display the running configuration for specified

interface on the switch.

(Extreme 220) (Routing) #show running-config | ?

begin Begin with the line that matches

exclude Exclude lines that matches

include Include lines that matches

section Display portion of lines

For new commands for the feature, see CLI Output Filtering Commands on page 137.

Using the Command-Line Interface

ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 13