Reference Guide

Column Meaning
IP Address IP address of the management interface or another device on the management network.
MAC Address Hardware MAC address of that device.
Interface For a service port the output is Management. For a network port, the output is the unit/slot/
port of the physical interface.
show eventlog
This command displays the event log, which contains error messages from the system. The event log is
not cleared on a system reboot. The unit is the switch identifier.
Format show eventlog [unit]
Mode Privileged EXEC
Column Meaning
File The file in which the event originated.
Line The line number of the event.
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Unit The unit for the event.
Note
Event log information is retained across a switch reboot.
show hardware
This command displays inventory information for the switch.
Note
The show version command and the show hardware command display the same
information. In future releases of the software, the show hardware command will not be
available. For a description of the command output, see the command show version on page
143.
Format show hardware
Mode Privileged EXEC
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 142