Reference Guide

--------- ---------------- ---------------- ---------------- ----------------
0/1 0 0 0 0
Port InOctets InUcastPkts InMcastPkts InBcastPkts
--------- ---------------- ---------------- ---------------- ----------------
0/1 0 0 0 0
0/2 0 0 0 0
0/3 15098 0 31 39
0/4 0 0 0 0
0/5 0 0 0 0
...
...
ch1 0 0 0 0
ch2 0 0 0 0
...
ch64 0 0 0 0
CPU 359533 0 3044 217
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
--------- ---------------- ---------------- ---------------- ----------------
0/1 0 0 0 0
0/2 0 0 0 0
0/3 131369 0 11 89
0/4 0 0 0 0
0/5 0 0 0 0
...
...
ch1 0 0 0 0
ch2 0 0 0 0
...
ch64 0 0 0 0
CPU 4025293 0 32910 120
show interface ethernet
This command displays detailed statistics for a specific interface or for all CPU trac based upon the
argument.
Format
show interface ethernet {unit/slot/port | switchport | all}
Mode Privileged EXEC
When you specify a value for unit/slot/port, the command displays the following information.
Column
Meaning
Packets Received
•
Total Packets Received (Octets) - The total number of octets of data (including those in
bad packets) received on the network (excluding framing bits but including Frame Check
Sequence (FCS) octets). This object can be used as a reasonable estimate of Ethernet
utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects
should be sampled before and after a common interval. The result of this equation is the
value Utilization which is the percent utilization of the Ethernet segment on a scale of 0 to
100 percent.
•
Packets Received 64 Octets - The total number of packets (including bad packets)
received that were 64 octets in length (excluding framing bits but including FCS octets).
•
Packets Received 65–127 Octets - The total number of packets (including bad packets)
received that were between 65 and 127 octets in length inclusive (excluding framing bits
but including FCS octets).
•
Packets Received 128–255 Octets - The total number of packets (including bad packets)
received that were between 128 and 255 octets in length inclusive (excluding framing bits
but including FCS octets).
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 147