Reference Guide

Table 7: CLI Command Modes (continued)
Command Mode Prompt Mode Description
Interface LAG
Config
Extreme nnn (Interface lag lag-intf-
num)#
Enters LAG interface configuration mode for the
specified LAG.
Line Console Extreme nnn (config-line)# Contains commands to configure outbound telnet
settings and console interface settings, as well as
to configure console login/enable authentication.
Line SSH Extreme nnn (config-ssh)# Contains commands to configure SSH login/
enable authentication.
Line Telnet Extreme nnn (config-telnet)# Contains commands to configure telnet login/
enable authentication.
AAA IAS User
Config
Extreme nnn (Config-IAS-User)# Allows password configuration for a user in the
IAS database.
Mail Server Config Extreme nnn (Mail-Server)# Allows configuration of the email server.
Policy Map Config Extreme nnn (Config-policy-map)# Contains the QoS Policy-Map configuration
commands.
Policy Class Config Extreme nnn (Config-policy-class-map)# Consists of class creation, deletion, and matching
commands. The class match commands specify
Layer 2, Layer 3, and general match criteria.
Class Map Config Extreme nnn (Config-class-map)# Contains the QoS class map configuration
commands for IPv4.
Ipv6_Class-Map
Config
Extreme nnn (Config-class-map)# Contains the QoS class map configuration
commands for IPv6.
Router OSPFv3
Config
Extreme nnn (Config rtr)# Contains the OSPFv3 configuration commands.
Router RIP Config Extreme nnn (Config-router)# Contains the RIP configuration commands.
Route Map Config Extreme nnn (config-route-map)# Contains the route map configuration commands.
IPv6 Address
Family Config
Extreme nnn (Config-router-af)# Contains the IPv6 address family configuration
commands.
Peer Template
Config
(Config-rtr-tmplt)# Contains the BGP peer template configuration
commands.
RADIUS Dynamic
Authorization
Config
(Config-radius-da) Contains the RADIUS Dynamic Authorization
commands.
MAC Access-list
Config
Extreme nnn (Config-mac-access-list)# Allows you to create a MAC Access-List and to
enter the mode containing MAC Access-List
configuration commands.
IPv4 Access-list
Config
Extreme nnn (Config-ipv4-acl)# Allows you to create an IPv4 named or extended
Access-List and to enter the mode containing
IPv4 Access-List configuration commands.
IPv6Access-list
Config
Extreme nnn (Config-ipv6-acl)# Allows you to create an IPv6 Access-List and to
enter the mode containing IPv6 Access-List
configuration commands.
Using the Command-Line Interface
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 15