Reference Guide

Column Meaning
•
GMRP Failed Registrations - The number of times attempted GMRP registrations could not
be completed.
•
STP BPDUs Transmitted - Spanning Tree Protocol Bridge Protocol Data Units sent.
•
STP BPDUs Received - Spanning Tree Protocol Bridge Protocol Data Units received.
•
RST BPDUs Transmitted - Rapid Spanning Tree Protocol Bridge Protocol Data Units sent.
•
RSTP BPDUs Received - Rapid Spanning Tree Protocol Bridge Protocol Data Units
received.
•
MSTP BPDUs Transmitted - Multiple Spanning Tree Protocol Bridge Protocol Data Units
sent.
•
MSTP BPDUs Received - Multiple Spanning Tree Protocol Bridge Protocol Data Units
received.
•
SSTP BPDUs Transmitted - Shared Spanning Tree Protocol Bridge Protocol Data Units sent.
•
SSTP BPDUs Received - Shared Spanning Tree Protocol Bridge Protocol Data Units
received.
Dot1x Statistics
•
EAPOL Frames Transmitted - The number of EAPOL frames of any type that have been
transmitted by this authenticator.
•
EAPOL Start Frames Received - The number of valid EAPOL start frames that have been
received by this authenticator.
Trac Load
Statistics
•
Load Interval - The length of time for which data is used to compute load statistics. The
value is given in seconds, and must be a multiple of 30. The allowable range is from 30 to
600 seconds
•
Bits Per Second Received - Approximate number of bits per second received. This value is
an exponentially weighted average and is aected by the configured load-interval.
•
Bits Per Second Transmitted. - Approximate number of bits per second transmitted. This
value is an exponentially weighted average and is aected by the configured load-interval.
•
Packets Per Second Received- Approximate number of packets per second received. This
value is an exponentially weighted average and is aected by the configured load-interval.
•
Packets Per Second Transmitted - Approximate number of packets per second
transmitted. This value is an exponentially weighted average and is aected by the
configured load-interval.
•
Percent Utilization Received - Value of link utilization in percentage representation for the
RX line.
•
Percent Utilization Transmitted - Value of link utilization in percentage representation for
the TX line.
Time Since
Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were
last cleared.
If you use the switchport keyword, the following information appears.
Column
Meaning
Packets Received Without
Error
The total number of packets (including broadcast packets and multicast packets)
received by the processor.
Broadcast Packets Received The total number of packets received that were directed to the broadcast address.
Note that this does not include multicast packets.
Packets Received With Error The total number of packets with errors (including broadcast packets and
multicast packets) received by the processor.
Packets Transmitted without
Errors
The total number of packets transmitted out of the interface.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 151