Reference Guide

Format show process app-list
Mode Privileged EXEC
Column Meaning
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the process.
Admin Status The administrative status of the process.
Auto Restart Whether the process will automatically restart if it stops.
Running Status Whether the process is currently running or stopped.
The following example shows CLI display output for the command.
Admin Auto Running
ID Name PID Status Restart Status
---- ---------------- ----- --------- --------- -------
1 dataplane 15309 Enabled Disabled Running
2 switchdrvr 15310 Enabled Disabled Running
3 syncdb 15314 Enabled Disabled Running
4 lighttpd 18718 Enabled Enabled Running
5 syncdb-test 0 Disabled Disabled Stopped
6 proctest 0 Disabled Enabled Stopped
7 user.start 0 Enabled Disabled Stopped
show process app-resource-list
This command displays the configured and in-use resources of each application.
Note
This command is available in Linux 2.6 only.
Format show process app-resource-list
Mode Privileged EXEC
Column Meaning
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the process.
Memory Limit The maximum amount of memory the process can consume.
CPU Share The maximum percentage of CPU utilization the process can consume.
Memory Usage The amount of memory the process is currently using.
Max Mem Usage The maximum amount of memory the process has used at any given time since it started.
The following example shows CLI display output for the command.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 157