Reference Guide

834 dot1s_task 0.00% 0.01% 0.01%
810 hapiRxTask 0.00% 0.01% 0.01%
805 dtlTask 0.00% 0.02% 0.02%
863 spmTask 0.00% 0.01% 0.00%
894 ip6MapLocalDataTask 0.00% 0.01% 0.01%
908 RMONTask 0.00% 0.11% 0.12%
-----------------------------------------------------------------
Total CPU Utilization 1.55% 1.58% 1.50%
show process proc-list
This application displays the processes started by applications created by the Process Manager.
Note
This command is available in Linux 2.6 only.
Format show process proc-list
Mode Privileged EXEC
Column Meaning
PID The number the software uses to identify the process.
Process Name The name that identifies the process.
Application ID-Name The application identifier and its associated name.
Child Whether the process has spawned a child process.
VM Size Virtual memory size.
VM Peak The maximum amount of virtual memory the process has used at a given time.
FD Count The file descriptors count for the process.
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show process proc-list
Process Application VM Size VM Peak
PID Name ID-Name Chld (KB) (KB) FD Count
---- ---------------- -------------------- ---- -------- -------- --------
15260 procmgr 0-procmgr No 1984 1984 8
15309 dataplane 1-dataplane No 293556 293560 11
15310 switchdrvr 2-switchdrvr No 177220 177408 57
15314 syncdb 3-syncdb No 2060 2080 8
18718 lighttpd 4-lighttpd No 5508 5644 11
18720 lua_magnet 4-lighttpd Yes 12112 12112 7
18721 lua_magnet 4-lighttpd Yes 25704 25708 7
show running-config
Use this command to display or capture the current setting of dierent protocol packages supported on
the switch. This command displays or captures commands with settings and configurations that dier
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 159