Reference Guide

from the default value. To display or capture the commands with settings and configurations that are
equal to the default value, include the all option.
Note
Show running-config does not display the User Password, even if you set one dierent from
the default.
The output is displayed in script format, which can be used to configure another switch with the same
configuration. If the optional scriptname is provided with a file name extension of “.scr”, the output is
redirected to a script file.
Note
If you issue the show running-config command from a serial connection, access to the
switch through remote connections (such as Telnet) is suspended while the output is being
generated and displayed.
Note
If you use a text-based configuration file, the show running-config command only displays
configured physical interfaces (that is, if any interface only contains the default configuration,
that interface will be skipped from the show running-config command output). This is true for
any configuration mode that contains nothing but default configuration. That is, the
command to enter a particular config mode, followed immediately by its exit command, are
both omitted from the show running-config command output (and hence from the startup-
config file when the system configuration is saved).
Use the following keys to navigate the command output.
Key
Action
[Enter] Advance one line.
[Space Bar] Advance one page.
[q] Stop the output and return to the prompt.
Note that --More-- or (q)uit is displayed at the bottom of the output screen until you reach the end of
the output.
This command captures the current settings of OSPFv2 and OSPFv3 (Open Shortest Path First version
3) trapflag status:
•
If all the flags are enabled, then the command displays trapflags all.
•
If all the flags in a particular group are enabled, then the command displays trapflags group name
all.
•
If some, but not all, of the flags in that group are enabled, the command displays trapflags
groupname flag-name.
Format
show running-config [all | scriptname]
Mode Privileged EXEC
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 160