Reference Guide

0 -rwx 245 Apr 26 2001 13:57:46 dh1024.pem
0 -rwx 0 May 09 2002 16:45:30 slog0.txt
show sysinfo
This command displays switch information.
Format show sysinfo
Mode Privileged EXEC
Column Meaning
Switch Description Text used to identify this switch.
System Name Name used to identify the switch.The factory default is blank. To configure the
system name, see snmp-server on page 92.
System Location Text used to identify the location of the switch. The factory default is blank. To
configure the system location, see snmp-server on page 92.
System Contact Text used to identify a contact person for this switch. The factory default is blank. To
configure the system location, see snmp-server on page 92.
System ObjectID The base object ID for the switch’s enterprise MIB.
System Up Time The time in days, hours and minutes since the last switch reboot.
Current SNTP Synchronized
Time
The system time acquired from a network SNTP (Simple Network Time Protocol)
server.
MIBs Supported A list of MIBs supported by this agent.
show tech-support
Use the show tech-support command to display system and configuration information when you
contact technical support. The output of the show tech-support command combines the output of the
following commands and includes log history files from previous runs:
•
show version
•
show sysinfo
•
show port all
•
show isdp neighbors
•
show logging
•
show event log
•
show logging buffered
•
show msg-queue
•
show trap log
•
show running-config
Including the optional ospf parameter also displays OSPF information.
Format
show tech-support [bgp|bgp-ipv6|ospf|ospfv3]
Mode Privileged EXEC
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 163