Reference Guide

length value
Use this command to set the pagination length (number of lines) for the sessions specified by
configuring on dierent Line Config modes (telnet/ssh/console). This setting is persistent.
Valid values are 0 (no lines) and 5 through 48.
Default 24
Format length value
Mode Line Config
The length command on Line Console mode also applies for Serial Console sessions.
no length value
Use this command to set the pagination length to the default value number of lines.
Format no length value
Mode Line Config
terminal length
Use this command to set the pagination length to value number of lines for the current session. This
command configuration takes an immediate eect on the current session and is nonpersistent.
Default
24 lines per page
Format terminal length value
Mode Privileged EXEC
no terminal length
Use this command to set the value to the length value configured on Line Config mode depending on
the type of session.
Format
no terminal length value
Mode Privileged EXEC
show terminal length
Use this command to display all the configured terminal length values.
Format
show terminal length
Mode Privileged EXEC
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 164