Reference Guide

environment trap
Use this command to configure environment status traps.
Format environment trap {fan|powersupply|temperature}
Mode Global Config
Parameter Definition
fan Enables or disables the sending of traps for fan status events. The default is
enabled.
powersupply Enables or disables the sending of traps for power supply status events. The default
is enabled.
temperature Enables or disables the sending of traps for temperature status events. The default
is enabled.
show environment
This command displays information about system disk space and usage.
Format show environment
Mode Privileged EXEC
The command output shows the following values:
Column
Meaning
Unit The system unit number.
Total Space The total amount of disk space on the system, in KB.
Free Space The amount of available disk space on the system, in KB.
Used Space The amount of disk space in use on the system, in KB.
Utilization The amount of disk space in use on the system, as a percentage of total disk space.
The following shows an example of the command output:
Unit Total space (KB) Free space (KB) Used space (KB) Utilization (%)
---- ---------------- --------------- --------------- ---------------
1 126,976 85,976 41,000 32
Logging Commands
This section describes the commands used to configure system logging, and to view logs and the
logging settings.
logging buered
This command enables logging to an in-memory log.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 167