Reference Guide

•
warning (4): The device is experiencing conditions that could lead to system errors if no action is
taken.
•
notice (5): The device is experiencing normal but significant conditions.
•
info (6): The device is providing non-critical information.
•
debug (7): The device is providing debug-level information.
Default Alert (1) and emergency (0) messages are sent immediately.
Format logging email urgent {severity-level | none}
Mode Global Config
no logging email urgent
This command resets the urgent severity level to the default value.
Format no logging email urgent
Mode Global Config
logging email message-type to-addr
This command configures the email address to which messages are sent. The message types supported
are urgent, non-urgent, and both. For each supported severity level, multiple email addresses can be
configured. The to-email-addr variable is a standard email address, for example
[e-mail].
Format
logging email message-type {urgent |non-urgent |both} to-addr
to-email-addr
Mode Global Config
no logging email message-type to-addr
This command removes the configured to-addr field of email.
Format
no logging email message-type {urgent |non-urgent |both} to-
addr to-email-addr
Mode Global Config
logging email from-addr
This command configures the email address of the sender (the switch).
Format
logging email from-addr from-email-addr
Mode Global Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 177