Reference Guide

Format mail-server {ip-address | ipv6-address | hostname}
Mode Global Config
no mail-server
This command removes the specified SMTP server from the configuration.
Format no mail-server {ip-address | ipv6-address | hostname}
Mode Global Config
security
This command sets the email alerting security protocol by enabling the switch to use TLS
authentication with the SMTP Server. If the TLS mode is enabled on the switch but the SMTP sever does
not support TLS mode, no email is sent to the SMTP server.
Default none
Format security {tlsv1 | none}
Mode Mail Server Config
port
This command configures the TCP port to use for communication with the SMTP server. The
recommended port for TLSv1 is 465, and for no security the recommended port is 25. However, any
nonstandard port in the range 1 to 65535 is allowed.
Default
25
Format port {465 | 25 | 1–65535}
Mode Mail Server Config
username (Mail Server Config)
This command configures the login ID the switch uses to authenticate with the SMTP server.
Default
admin
Format username name
Mode Mail Server Config
password
This command configures the password the switch uses to authenticate with the SMTP server.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 181