Reference Guide

Table Of Contents

clear conﬁg

This command resets the conﬁguration to the factory defaults without powering o the switch. When

you issue this command, you are prompted to conﬁrm that the reset should proceed. When you

respond with y, the switch's current conﬁguration is reset to the factory default values. The switch is not

rebooted.

Format clear config

Mode Privileged EXEC

clear counters

This command clears the statistics for a speciﬁed unit/slot/port, for all the ports, or for an interface on a

VALN based on the argument, including the loop protection counters.

Format clear counters {unit/slot/port | all | vlan id}

Mode Privileged EXEC

clear igmpsnooping

This command clears the tables managed by the IGMP (Internet Group Management Protocol)

Snooping function and attempts to delete these entries from the Multicast Forwarding Database.

Format

clear igmpsnooping

Mode Privileged EXEC

clear ip access-list counters

This command clears the counters of the speciﬁed IP ACL (Access Control List)

and IP ACL rule.

Format

clear ip access-list counters acl-ID | acl-name rule-id

Mode Privileged EXEC

clear ipv6 access-list counters

This command clears the counters of the speciﬁed IP ACL

and IP ACL rule.

Format

clear ipv6 access-list counters acl-name rule-id

Mode Privileged EXEC

Utility Commands

ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 185