Reference Guide

verify | noverify is only available if the image/configuration verify options feature is enabled (see file
verify on page 193). verify specifies that digital signature verification will be performed for the specified
downloaded image or configuration file. noverify specifies that no verification will be performed.
The keyword ias-users supports the downloading of the IAS user database file. When the IAS users
file is downloaded, the switch IAS user’s database is replaced with the users and its attributes available
in the downloaded file. In the command copy url ias-users, for url one of the following is used
for IAS users file:
tftp:// {ipaddr | hostname} | {ipv6address | hostname/filepath/filename}
sftp | scp://username@ipaddress/filepath/filename
Note
The maximum length for the file path is 160 characters, and the maximum length for the file
name is 31 characters.
For FTP, TFTP, SFTP and SCP, the ipaddr|hostname parameter is the IP address or host name of the
server, filepath is the path to the file, and filename is the name of the file you want to upload or
download. For SFTP and SCP, the username parameter is the username for logging into the remote
server via SSH.
Note
ip6address is also a valid parameter for routing packages that support IPv6.
For platforms that include stacking, use the optional [unit unit id] parameter (when available) to specify
the stack member to use as the source for the item to copy. If no unit is specified, the item is copied
from the stack master.
To copy OpenFlow SSL certificates to the switch using TFTP or XMODEM, using only the following
options pertinent to the OpenFlow SSL certificates.
Format
copy {mode | file} nvram:{openflow-ssl-ca-cert | openflow-
ssl-cert | openflow-ssl-priv-key}
Mode Privileged EXEC
Caution
Remember to upload the existing fastpath.cfg file o the switch prior to loading a new release
image in order to make a backup.
Table 11: Copy Parameters
Source Destination Description
nvram:application:
sourcefilename
url
Filename of source application file.
nvram:backup-config nvram:startup-config Copies the backup configuration to the startup
configuration.
nvram:clibanner
url
Copies the CLI banner to a server.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 190