Reference Guide

Table 11: Copy Parameters (continued)
Source Destination Description
{active | backup}
url
Upload either image to the remote server.
active backup Copy the active image to the backup image.
backup active Copy the backup image to the active image.
{active | backup} unit://unit/{active |
backup}
Copy an image from the management node to a given
node in a stack. Use the unit parameter to specify the
node to which the image should be copied.
{active | backup} unit://*/{active | backup} Copy an image from the management node to all of the
nodes in a stack.
The following shows an example of downloading and applying ias users file.
(Extreme 220) (Routing) #copy tftp://10.131.17.104/aaa_users.txt ias-users
Mode........................................... TFTP
Set Server IP.................................. 10.131.17.104
Path........................................... ./
Filename....................................... aaa_users.txt
Data Type...................................... IAS Users
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.
Validating and updating the users to the IAS users database.
Updated IAS users database successfully.
(Extreme 220) (Routing) #
file verify
This command enables digital signature verification while an image and/or configuration file is
downloaded to the switch.
Format
file verify {all | image | none | script}
Mode Global Config
Parameter Description
all Verifies the digital signature of both image and configuration files.
image Verifies the digital signature of image files only.
none Disables digital signature verification for both images and configuration files.
script Verifies the digital signature of configuration files.
no file verify
Resets the configured digital signature verification value to the factory default value.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 193