Reference Guide

show poe
Use this command to display the current PoE configuration and status information for all ports.
Format show poe
Mode Privileged EXEC
Column Meaning
Firmware Version The firmware version on the controller. This value cannot be changed or upgraded.
PSE Main Operational Status The operational status of the PSE.
Total Power Available The total power budget.
Threshold Power The total power minus the guard band. If usage goes above this value, new ports are
not powered up.
Total Power Consumed Total power delivered by all ports.
Usage Threshold User-configured threshold, used for Guard band calculation.
Power Management Mode The current power management mode: Dynamic or Static.
Traps Whether PoE traps are enabled or disabled.
The following example shows CLI display output for the command.
(Extreme 220) #show poe
Firmware Version............................... 1.3.0.7
PSE Main Operational Status.................... OFF
Total Power Available.......................... 900 Watts
Threshold Power................................ 459 W
Total Power Consumed........................... 0
Usage Threshold................................ 90
Power Management Mode.......................... Dynamic
Traps.......................................... Enable
show poe port configuration
Use this command to display PoE port configuration information for individual ports or all ports.
Format
show poe port configuration { all | unit/slot/port }
Mode Privileged EXEC
(Extreme 220) #show poe port configuration 0/1
Admin Power Power Limit High Power Detection Timer
Schedule
Intf Mode Priority Limit Type Mode Type
(mW)
------ ------- -------- ------ -------------- ------------- ---------------------
----------------
0/1 Enable Low 60000 User Defined UPOE auto
None
show poe port info
Use this command to display PoE port information.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 199