Reference Guide

Column Meaning
IP Address / Hostname IP address or hostname of configured SNTP Server.
Address Type Address Type of configured SNTP server (IPv4, IPv6, or DNS).
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port Server Port Number.
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast Requests Number of requests to the server.
Failed Unicast Requests Number of failed requests from server.
show sntp source-interface
Use this command to display the SNTP client source interface configured on the switch.
Format show sntp source-interface
Mode Privileged EXEC
Column Meaning
SNTP Client Source Interface The interface ID of the physical or logical interface configured as the SNTP
client source interface.
SNTP Client Source IPv4 Address The IP address of the interface configured as the SNTP client source interface.
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show sntp source-interface
SNTP Client Source Interface................... (not configured)
(Extreme 220) (Routing) #
Time Zone Commands
Use the Time Zone commands to configure system time and date, Time Zone and Summer Time (that is,
Daylight Saving Time). Summer time can be recurring or non-recurring.
clock set
This command sets the system time and date.
Format
clock set hh:mm:ss
clock set mm/dd/yyyy
Mode Global Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 205