Reference Guide

Format no client-identifier
Mode DHCP Pool Config
client-name
This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII
characters.
Default None
Format client-name name
Mode DHCP Pool Config
no client-name
This command removes the client name.
Format no client-name
Mode DHCP Pool Config
default-router
This command specifies the default router list for a DHCP client. {address1, address2… address8} are
valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is
invalid.
Default
None
Format default-router address1 [address2....address8]
Mode DHCP Pool Config
no default-router
This command removes the default router list.
Format
no default-router
Mode DHCP Pool Config
dns-server
This command specifies the IP servers available to a DHCP client. Address parameters are valid IP
addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 210