Reference Guide

Format no host
Mode DHCP Pool Config
lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP
server to a DHCP client. The overall lease time should be between 1-86400 minutes. If you specify
infinite, the lease is set for 60 days. You can also specify a lease duration. Days is an integer from 0 to
59. Hours is an integer from 0 to 23. Minutes is an integer from 0 to 59.
Default 1 (day)
Format lease [{days [hours] [minutes] | infinite}]
Mode DHCP Pool Config
no lease
This command restores the default value of the lease time for DHCP Server.
Format no lease
Mode DHCP Pool Config
network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on the server.
Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The prefix-length is an
integer from 0 to 32.
Default
None
Format network networknumber [{mask | prefixlength}]
Mode DHCP Pool Config
no network
This command removes the subnet number and mask.
Format
no network
Mode DHCP Pool Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 212