Reference Guide

Default None
Format ip dhcp excluded-address lowaddress [highaddress]
Mode Global Config
no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. The lowaddress and
highaddress are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
Format no ip dhcp excluded-address lowaddress [highaddress]
Mode Global Config
ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to a
pool address as part of a ping operation. By default the number of packets sent to a pool address is 2,
which is the smallest allowed number when sending packets. Setting the number of packets to 0
disables this command.
Default
2
Format ip dhcp ping packets 0,2-10
Mode Global Config
no ip dhcp ping packets
This command restores the number of ping packets to the default value.
Format
no ip dhcp ping packets
Mode Global Config
service dhcp
This command enables the DHCP
server.
Default
Disabled
Format service dhcp
Mode Global Config
no service dhcp
This command disables the DHCP server.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 216