Reference Guide

cpu-trac direction match tcp
Use this command to configure the source or destination TCP port-specific filter. The statistics and/or
traces for configured filters are obtained for the packet matching configured source/destination TCP
port.
Default None
Format cpu-traffic direction {tx|rx|both} match {srctcp|dsttcp} port
[mask mask]
Mode Global Config
no cpu-trac direction match tcp
Use this command to remove the configured source/destination TCP port filter.
Format no cpu-traffic direction {tx|rx|both} match {srctcp|dsttcp}
port [mask mask]
Mode Global Config
cpu-trac direction match udp
Use this command to configure the source or destination UDP port-specific filter. The statistics and/or
traces for configured filters are obtained for the packet matching configured source/destination UDP
port.
Default
None
Format cpu-traffic direction {tx|rx|both} match {srcudp|dstudp} port
[mask mask]
Mode Global Config
no cpu-trac direction match udp
Use this command to remove the configured source/destination UDP port filter.
Format
no cpu-traffic direction {tx|rx|both} match {srcudp|dstudp}
port [mask mask]
Mode Global Config
cpu-trac mode
Use this command to configure CPU-trac mode. The packets in the RX/TX direction are matched
when the mode is enabled.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 232