Reference Guide

Default Disabled
Format cpu-traffic mode
Mode Global Config
no cpu-trac mode
Use this command to disable CPU-trac mode.
Format no cpu-traffic mode
Mode Global Config
cpu-trac trace
Use this command to configure CPU packet tracing. The packet can be received by multiple
components. If the feature is enabled and tracing configured, the packets are traced per the defined
filter. If dump-pkt is enabled, the first 64 bytes of the packet are displayed along with the trace
statistics.
Default Disabled
Format cpu-traffic trace {dump-pkt}
Mode Global Config
no cpu-trac trace
Use this command to disable CPU packet tracing and dump-pkt (if configured).
Format
no cpu-traffic trace {dump-pkt}
Mode Global Config
show cpu-trac
Use this command to display the current configuration parameters.
Default
None
Format show cpu-traffic
Mode Privileged EXEC
(Extreme 220) (Routing) #show cpu-traffic
Admin Mode..................................... Disable
Packet Trace................................... Disable
Packet Dump.................................... Disable
Direction TX:
Filter Options................................. N/A
Interface...................................... N/A
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 233