Reference Guide

Src TCP parameters............................. 0 0
Dst TCP parameters............................. 0 0
Src UDP parameters............................. 0 0
Dst UDP parameters............................. 0 0
Src IP parameters.............................. 0.0.0.0 0.0.0.0
Dst IP parameters.............................. 0.0.0.0 0.0.0.0
Src MAC parameters............................. 00:00:00:00:00:00 00:00:00:00:00:00
Dst MAC parameters............................. 00:00:00:00:00:00 00:00:00:00:00:00
Custom filter parameters1...................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters2...................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters3...................... Offset=0x0 Value=0x0 Mask=0x0
Direction RX:
Filter Options................................. N/A
Interface...................................... N/A
Src TCP parameters............................. 0 0
Dst TCP parameters............................. 0 0
Src UDP parameters............................. 0 0
Dst UDP parameters............................. 0 0
Src IP parameters.............................. 0.0.0.0 0.0.0.0
Dst IP parameters.............................. 0.0.0.0 0.0.0.0
Src MAC parameters............................. 00:00:00:00:00:00 00:00:00:00:00:00
Dst MAC parameters............................. 00:00:00:00:00:00 00:00:00:00:00:00
Custom filter parameters1...................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters2...................... Offset=0x0 Value=0x0 Mask=0x0
Custom filter parameters3...................... Offset=0x0 Value=0x0 Mask=0x0
show cpu-trac interface
Use this command to display interface statistics for configured filters. The statistics can be displayed for
a specific filter (for example, stp, udld, arp etc). If no filter is specified, statistics are displayed for all
configured filters. Similarly, source/destination IP, TCP, UDP or MAC along with custom filter can be used
as command option to get statistics.
Default
None
Format show cpu-traffic interface {all | unit/slot/port | cpu }
filter
Mode Privileged EXEC
show cpu-trac summary
Use this command to display summary statistics for configured filters for all interfaces.
Default
None
Format show cpu-traffic summary
Mode Privileged EXEC
(Extreme 220) (Routing) #show cpu-traffic summary
Filter Received Transmitted
------------ ---------- -----------
STP 0 0
LACPDU 0 0
ARP 0 0
UDLD 0 0
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 234