Reference Guide

exception protocol
Use this command to specify the protocol used to store the core dump file.
Note
This command is only available on selected Linux-based platforms.
Default None
Format exception protocol {nfs | tftp | ftp | local | usb | none}
Mode Global Config
no exception protocol
Use this command to reset the exception protocol configuration to its factory default value.
Note
This command is only available on Linux-based platforms.
Default None
Format no exception protocol
Mode Global Config
exception dump tftp-server
Use this command to configure the IP address of a remote TFTP server in order to dump core files to an
external server.
Note
This command is only available on selected Linux-based platforms.
Default None
Format exception dump tftp-server {ip-address}
Mode Global Config
no exception dump tftp-server
Use this command to reset the exception dump remote server configuration to its factory default value.
Note
This command is only available on selected Linux-based platforms.
Default None
Format no exception dump tftp-server
Mode Global Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 236