Reference Guide

Default None
Format exception dump filepath
Mode Global Config
exception core-file
Use this command to configure a prefix for a core-file name. The core file name is generated with the
prefix as follows:
If hostname is selected:
file-name-prefix_hostname_Time_Stamp.bin
If hostname is not selected:
file-name-prefix_MAC_Address_Time_Stamp.bin
If hostname is configured the core file name takes the hostname, otherwise the core-file names uses the
MAC address when generating a core dump file. The prefix length is 15 characters.
Note
This command is only available on selected Linux-based platforms.
Default Core
Format exception core-file {file-name-prefix | [hostname] | [time-
stamp]}
Mode Global Config
no exception core-file
Use this command to reset the exception core file prefix configuration to its factory default value. The
hostname and time-stamp are disabled.
Note
This command is only available on selected Linux-based platforms.
Default Core
Format no exception core-file
Mode Global Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 238