Reference Guide

exception switch-chip-register
This command enables or disables the switch-chip-register dump in case of an exception. The switch-
chip-register dump is taken only for a master unit and not for member units.
Note
This command is only available on selected Linux-based platforms.
Default Disabled
Format exception switch-chip-register {enable | disable}
Mode Global Config
exception dump ftp-server
This command configures the IP address of remote FTP server to dump core files to an external server.
If the username and password are not configured, the switch uses anonymous FTP. (The FTP server
should be configured to accept anonymous FTP.)
Default None
Format exception dump ftp-server ip-address [{username user-name
password password}]
Mode Global Config
no exception dump ftp-server
This command resets exception dump remote FTP server configuration to its factory default value. This
command also resets the FTP username and password to empty string.
Default
None
Format no exception dump ftp-server
Mode Global Config
exception dump compression
This command enables compression mode.
Default
Enabled
Format exception dump compression
Mode Global Config
no exception dump compression
This command disables compression mode.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 239