Reference Guide

Format slot unit/slot cardindex
Mode Global Config
Note
Card index can be obtained by executing show supported cardtype command in User EXEC
or Privileged EXEC mode.
no slot
This command removes configured information from an existing slot in the system.
Format no slot unit/slot cardindex
Mode Global Config
Note
Card index can be obtained by executing show supported cardtype command in User EXEC
or Privileged EXEC mode.
set slot disable
This command configures the administrative mode of the slot(s). If you specify [all], the command is
applied to all slots, otherwise the command is applied to the slot identified by unit/slot.
If a card or other module is present in the slot, this administrative mode will eectively be applied to the
contents of the slot. If the slot is empty, this administrative mode will be applied to any module that is
inserted into the slot. If a card is disabled, all the ports on the device are operationally disabled and
shown as “unplugged” on management screens.
Format
set slot disable [unit/slot] | all]
Mode Global Config
no set slot disable
This command unconfigures the administrative mode of the slot(s). If you specify all, the command
removes the configuration from all slots, otherwise the configuration is removed from the slot identified
by unit/slot.
If a card or other module is present in the slot, this administrative mode removes the configuration from
the contents of the slot. If the slot is empty, this administrative mode removes the configuration from
any module inserted into the slot. If a card is disabled, all the ports on the device are operationally
disabled and shown as “unplugged” on management screens.
Format
no set slot disable [unit/slot] | all]
Mode Global Config
Stacking Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 24