Reference Guide

show exception
Use this command to display the configuration parameters for generating a core dump file.
Note
This command is only available on selected Linux-based platforms.
Default None
Format show exception
Mode Privileged EXEC
The following shows an example of this command.
show exception
Coredump file name core
Coredump filename uses hostname False
Coredump filename uses time-stamp TRUE
TFTP Server Address TFTP server configuration
FTP Server IP FTP server configuration
FTP user name FTP user name
FTP password FTP password
NFS Mount point NFS mount point configuration
File path Remote file path
Core File name prefix Core file prefix configuration.
Hostname Core file name contains hostname if enabled.
Timestamp Core file name contains timestamp if enabled.
Switch Chip Register Dump Switch chip register dump configuration
Compression mode TRUE/FALSE
Active network port 0/28
Stack IP Address Protocol DHCP/Static
Stack IP Address List of IP addresses configured
show exception core-dump-file
This command displays core dump files existing on the local file system.
Default
None
Format show exception core-dump-file
Mode Privileged EXEC, Config Mode
show exception log
This command displays core dump traces on the local file system.
Default
None
Format show exception log [previous]
Mode Privileged EXEC, Config Mode
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 241