Reference Guide

Format no sflow receiver indx {ip ip-address | maxdatagram size |
owner string timeout interval | port 14-port}
Mode Global Config
sflow receiver owner timeout
Use this command to configure a receiver as a timeout entry. As the sFlow receiver is configured as a
timeout entry, information related to sampler and pollers are also shown in the running-config and are
retained after reboot.
If a receiver is configured with a specific value, these configurations will not be shown in running-config.
Samplers and pollers information related to this receiver will also not be shown in running-config.
Format sflow receiver index owner owner-string timeout
Mode Global Config
Parameter Description
index
Receiver index identifier. The range is 1 to 8.
owner-string
The owner name corresponds to the receiver name. The identity string for the
receiver, the entity making use of this sFlowRcvrTable entry. The range is 127
characters. The default is a null string. The empty string indicates that the entry is
currently unclaimed and the receiver configuration is reset to the default values. An
entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is
unclaimed before trying to claim it. The entry is claimed by setting the owner string
to a non-null value. The entry must be claimed before assigning a receiver to a
sampler or poller.
sflow
receiver owner notimeout
Use this command to configure a receiver as a non-timeout entry. Unlike entries configured with a
specific timeout value, this command will be shown in show running-config and retained after reboot.
As the sFlow receiver is configured as a non-timeout entry, information related to sampler and pollers
will also be shown in the running-config and will be retained after reboot.
If a receiver is configured with a specific value, these configurations will not be shown in running-config.
Samplers and pollers information related to this receiver will also not be shown in running-config.
Format
sflow receiver index owner owner-string notimeout
Mode Global Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 248