Reference Guide

Parameter Description
index
Receiver index identifier. The range is 1 to 8.
owner-string
The owner name corresponds to the receiver name. The identity string for the
receiver, the entity making use of this sFlowRcvrTable entry. The range is 127
characters. The default is a null string. The empty string indicates that the entry is
currently unclaimed and the receiver configuration is reset to the default values. An
entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is
unclaimed before trying to claim it. The entry is claimed by setting the owner string
to a non-null value. The entry must be claimed before assigning a receiver to a
sampler or poller.
sflow source-interface
Use this command to specify the physical or logical interface to use as the sFlow client source interface.
If configured, the address of source Interface is used for all sFlow communications between the sFlow
receiver and the sFlow client. Otherwise there is no change in behavior. If the configured interface is
down, the sFlow client falls back to normal behavior.
Format sflow source-interface {unit/slot/port | loopback loopback-id
| tunnel tunnel-id | vlan vlan-id}
Mode Global Config
Parameter Description
unit/slot/port
VLAN or port-based routing interface.
loopback-id
Configures the loopback interface to use as the source IP address. The range of the
loopback ID is 0 to 7.
tunnel-id
Configures the tunnel interface to use as the source IP address. The range of the
tunnel ID is 0 to 7.
vlan-id
Configures the VLAN interface to use as the source IP address. The range of the
VLAN ID is 1 to 4093.
no sflow source-interface
Use this command to reset the sFlow source interface to the default settings.
Format
no sflow source-interface
Mode Global Config
show sflow receivers
Use this command to display configuration information related to the sFlow receivers.
Format
show sflow receivers [index]
Mode Privileged EXEC
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 249