Reference Guide

Column Meaning
Rx_dll_enabled Status of the EEE capability negotiation on the local system.
Rx_dll_ready Data Link Layer ready: This variable indicates that the RX system initialization is
complete and is ready to update/receive LLDPDU containing EEE TLV. This variable
is updated by the local system software.
Cumulative Energy Saving Estimated Cumulative energy saved on this port in (Watts × hours) due to all green
modes enabled.
Time Since Counters Last
Cleared
Time Since Counters Last Cleared (since the time of power up, or after the clear
eee statistics command is executed).
The following example shows CLI display output for on a system that supports all Green Ethernet
features.
(Extreme 220) (Routing) #show green-mode 1/0/1
Energy Detect Admin Mode.................... Enabled
Operational Status....................... Active
Reason................................... No Energy Detected
Auto Short Reach Admin Mode................. Enabled
Forced Short Reach Admin Mode............... Enabled
Operational Status....................... Active
Reason................................... Forced
EEE Admin Mode.............................. Enabled
Transmit Idle Time....................... 0
Transmit Wake Time....................... 0
Rx Low Power Idle Event Count............ 0
Rx Low Power Idle Duration (uSec)........ 0
Tx Low Power Idle Event Count............ 0
Tx Low Power Idle Duration (uSec)........ 0
Tw_sys_tx (usec)......................... XX
Tw_sys_tx Echo(usec)..................... XX
Tw_sys_rx (usec)......................... XX
Tw_sys_tx Echo(usec)..................... XX
Fallback Tw_sys (usec)................... XX
Remote Tw_sys_tx (usec).................. XX
Remote Tw_sys_tx Echo(usec).............. XX
Remote Tw_sys_rx (usec).................. XX
Remote Tw_sys_tx Echo(usec).............. XX
Remote fallback Tw_sys (usec)............ XX
Tx DLL enabled........................... Yes
Tx DLL ready............................. Yes
Rx DLL enabled........................... Yes
Rx DLL ready............................. Yes
Cumulative Energy Saving (W * H).......... XX
Time Since Counters Last Cleared......... 1 day 20 hr 47 min 34 sec
clear green-mode statistics
Use this command to clear the following Green Ethernet mode statistics:
•
EEE LPI (Low Power Idle) event count and LPI duration
•
EEE LPI history table entries
•
Cumulative power-savings estimates
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 256