Reference Guide

Parameter Description
rising-event-index
The index of the eventEntry that is used when a rising threshold is crossed.
The range is 1 to 65535. The default is 1.
falling-threshold
highvalue
The upper 32 bits of the absolute value for threshold for the sampled
statistic. The range is 0 to 4294967295. The default is 0.
falling-threshold
lowvalue
The lower 32 bits of the absolute value for threshold for the sampled
statistic. The range is 0 to 4294967295. The default is 1.
status The sign of the data for the falling threshold, as defined by the objects
hcAlarmFallingThresAbsValueLow and hcAlarmFallingThresAbsValueHigh.
Possible values are valueNotAvailable, valuePositive, or valueNegative. The
default is valuePositive.
falling-event-index
The index of the eventEntry that is used when a falling threshold is crossed.
The range is 1 to 65535. The default is 2.
startup value The type of alarm that is sent when the entry is enabled. Possible values are
rising, falling, or rising-falling.
owner string The owner string associated with the alarm entry. The default is
monitorHCAlarm.
The following shows an example of the command.
(Extreme 220) (Config) # rmon hcalarm 1 ifInOctets.1 30 absolute rising-threshold high 1
low 100 status positive 1 falling-threshold high 1 low 10 status positive startup rising
owner myOwner
no rmon hcalarm
This command deletes the rmon hcalarm entry.
Format
no rmon hcalarm alarm-number
Mode Global Config
The following shows an example of the command.
(Extreme 220) (Config) # no rmon hcalarm 1
rmon event
This command sets the RMON event entry in the RMON event MIB group.
Format
rmon event event-number [description string | log |owner
string |trap community]
Mode Global Config
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 260