Reference Guide

Format stats flow-based rule-id timerange time-range-name [{srcip
ip-address} {dstip ip-address} {srcmac mac-address} {dstmac
mac-address} {srctcpport portid} {dsttcpport portid}
{srcudpport portid} {dstudpport portid}]
Mode Global Config
Parameter Description
rule-id
The flow-based rule ID. The range is 1 to 16. The default is None.
time-range-name
Name of the time range for the group or the flow-based rule. The range is 1 to 31
alphanumeric characters. The default is None.
srcip ip-address The source IP address.
dstip ip-address The destination IP address.
srcmac mac-address The source MAC address.
dstmac mac-address The destination MAC address.
srctcpport portid The source TCP port number.
dsttcpport portid The destination TCP port number.
srcudpport portid The source UDP port number.
dstudpport portid The destination UDP port number.
The following example shows how the command could be entered.
(Extreme 220) (Config) #stats flow-based 1 timerange test srcip 1.1.1.1 dstip 2.2.2.2
srcmac 1234 dstmac 1234 srctcpport 123 dsttcpport 123 srcudpport 123 dstudpport 123
(Extreme 220) (Config) #stats flow-based 2 timerange test srcip 1.1.1.1 dstip 2.2.2.2
srctcpport 123 dsttcpport 123 srcudpport 123 dstudpport 123
no stats flow-based
This command deletes flow-based statistics.
Format
no stats flow-based rule-id
Mode Global Config
The following example shows how the command could be entered.
(Extreme 220) (Config) # no stats flow-based 1
(Extreme 220) (Config) # no stats flow-based 2
stats flow-based reporting
This command configures the reporting mechanism for all the flow-based rules configured on the
system. There is no per flow-based rule reporting mechanism. Setting the reporting method as none
resets all the reporting methods.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 272