Reference Guide

Format stats flow-based reporting list of reporting methods
Mode Global Config
The following example shows how the command could be entered.
(Extreme 220) (Config) # stats flow-based reporting console email syslog
(Extreme 220) (Config) # stats flow-based reporting email syslog
(Extreme 220) (Config) # stats flow-based reporting none
stats group
This command applies the group specified on an interface or interface-range.
Format stats group group id | name
Mode Interface Config
Parameter Description
group id
The unique identifier for the group.
name
The name of the group.
The following example shows how the command could be entered.
(Extreme 220) (Interface 1/0/1-1/0/10)# stats group 1
(Extreme 220) (Interface 1/0/1-1/0/10)# stats group 2
no stats group
This command deletes the interface or interface-range from the group specified.
Format
no stats group group id | name
Mode Interface Config
The following example shows how the command could be entered.
(Extreme 220) (Interface 1/0/1-1/0/10)# no stats group 1
(Extreme 220) (Interface 1/0/1-1/0/10)# no stats group 2
stats flow-based
This command applies the flow-based rule specified by the ID on an interface or interface-range.
Format
stats flow-based rule-id
Mode Interface Config
Parameter Description
rule-id
The unique identifier for the flow-based rule.
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 273