Reference Guide

The following example shows how the command could be entered.
(Extreme 220) (Interface 1/0/1-1/0/10)# stats flow-based 1
(Extreme 220) (Interface 1/0/1-1/0/10)# stats flow-based 2
no stats flow-based
This command deletes the interface or interface-range from the flow-based rule specified.
Format no stats flow-based rule-id
Mode Interface Config
The following example shows how the command could be entered.
(Extreme 220) (Config) (Interface 1/0/1-1/0/10)# no stats flow-based 1
(Extreme 220) (Config) (Interface 1/0/1-1/0/10)# no stats flow-based 2
show stats group
This command displays the configured time range and the interface list for the group specified and
shows collected statistics for the specified time-range name on the interface list after the time-range
expiry.
Format
show stats group group id | name
Mode Privileged EXEC
Parameter Description
group id
The unique identifier for the group.
name
The name of the group.
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show stats group received
Group: received
Time Range: test
Interface List
-----------------
1/0/2, 1/0/4, lag 1
Counter ID Interface Counter Value
------------------------- --------- ------------
Rx Total 1/0/2 951600
Rx Total 1/0/4 304512
Rx Total lag 1 0
Rx 64 1/0/2 0
Rx 64 1/0/4 4758
Rx 64 lag 1 0
Rx 65to128 1/0/2 0
Rx 65to128 1/0/4 0
Rx 65to128 lag 1 0
Rx 128to255 1/0/2 4758
Rx 128to255 1/0/4 0
Rx 128to255 lag 1 0
Rx 256to511 1/0/2 0
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 274