Reference Guide

The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show stats group port-utilization
Group: port-utilization
Time Range: test
Interface List
--------------
1/0/2, 1/0/4, lag 1
Interface Utilization (%)
--------- ---------------
1/0/2 0
1/0/4 0
lag 1 0
show stats flow-based
This command displays the configured time range, flow-based rule parameters, and the interface list for
the flow specified.
Format show stats flow-based rule-id | all
Mode Privileged EXEC
Parameter Description
rule-id
The unique identifier for the flow-based rule.
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show stats flow-based all
Flow based rule Id............................. 1
Time Range..................................... test
Source IP...................................... 1.1.1.1
Source MAC..................................... 1234
Source TCP Port................................ 123
Source UDP Port................................ 123
Destination IP................................. 2.2.2.2
Destination MAC................................ 1234
Destination TCP Port........................... 123
Destination UDP Port........................... 123
Interface List
--------------
1/0/1 - 1/0/2
Interface Hit Count
--------- ---------
1/0/1 100
1/0/2 0
Flow based rule Id............................. 2
Time Range..................................... test
Source IP...................................... 1.1.1.1
Source TCP Port................................ 123
Source UDP Port................................ 123
Destination IP................................. 2.2.2.2
Destination TCP Port........................... 123
Destination UDP Port........................... 123
Interface List
--------------
1/0/1 - 1/0/2
Interface Hit Count
--------- ---------
Utility Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 275